Introducing the LEFT-EZE™ Rule

EDIT UPDATE - 4/5/17 - Please see the revised tutorial -
LEFT-EZE™ Rule - Revised Tutorial - HERE -
===

EDIT UPDATE - 4/4/17 -
Please note that ALL of the photos shown in this post are of the PROTOTYPE -

The FINAL VERSION is slightly different - I made THREE CHANGES -

On the prototype - the 1/4" line on the longest side is a solid line.
On the final version - it is a dashed line.

When you turn the ruler so that you can read "This Way For a STRAIGHT Cut" -
The prototype has the numbers in the second column reading 6-5-4-3-2-1 -
In the final version - the numbers read 1-2-3-4-5-6 from top to bottom.-

The prototype has no "hang-hole".
The final version has a "hang-hole" in the BOTTOM LEFT corner.

I plan to redo the demo with new photos soon - ;))

================================================================

Today I would like to introduce you to my new LEFT-EZE™ Rule -

And - just for fun -

I thought that I would do it in the form of a REVIEW -

Using the same format that I used to review the EASY SQUARE JR.
By Sharon Hultgren - EZ Quilting - Antioch, TN USA 37013
www - dot - ezquilting - dot - com - Made in China
My FAVORITE SQUARE ruler - ;))

So here goes -

============
LEFT-HANDED QUILTING - Review - Ruler - LEFT-EZE™ Rule
============
Note - these instructions are written in LEFT-EZE™.
If you are right-handed - just reverse the directions.
============

Today I want to show you a REALLY cool little ruler -

That Left-Handed Quilters can use - hassle-free - ;))

My kind of ruler!! - ;))

But first -

Disclaimer -
I AM in no way affiliated with the manufacturer or supplier of this product -
I did not get this product for FREE in exchange for a review - aka barter.
I designed it and I paid for it.
I have no intention of slandering or libeling anyone or any product.
I am simply stating my opinions - I could be wrong - you may disagree.
My opinions are based on my experience with this product - your results may vary.
I think that about covers it - if I missed something - let me know.
I am not a lawyer - and I am just trying to cover my assets. - ;))
===

It’s called the
LEFT-EZE™ Rule
By A Left-Handed Quilter™
www - dot - alefthandedquilter - dot - blogspot - dot - com
Made in the U.S.A.

Description -
This little ruler is a LEFT-Triangle - ;))
It can be used to cut Half-Square Triangles (HST) -
And Quarter-Square Triangles (QST) for Hourglass Blocks -
And Flying Geese units -
And Squares -
LEFT-HANDED!! - ;))

It measures 6-1/2” - technically 6-7/8" - but who's counting -
It has a 1/4” dashed line on the longest side -
The "hypotenuse" - for those of you who remember your high school Geometry class -
So that you can see that the "black tip" in the top right corner is a "dog-ear"
That will be automatically cut off because you are using pre-cut strips -
(The prototype has a solid line -
this is the first of 3 "cosmetic" changes that I made for the final version.)

===

Where you can get it -

For now this ruler is not available in your Local Quilt Shop -
Or from your favorite suppliers -
It is only available from me - on my blog(s) -
You can email me at - caseyq19 - at - gmail - dot - com -
And put "Waiting List" or "Order" in the subject line -
I will accept personal checks until I get set up with PayPal -
Please understand that it's only me -
And this will all be very "low-tech" until it becomes "high volume" - ;))

===
EDIT UPDATE -

For those of you who may have missed my previous posts -

And for those of you who are interested -

I approved the final artwork on the LEFT-EZE™ Rule and placed my first order last week. The guy at the manufacturer's office said that he "will be in touch in a few weeks, once I have a more accurate estimated production date."

Good thing I'm not in a hurry -

Or holding my breath - LOL - ;))

And I set up another (private) blog for my "shop" - LEFT-EZE™ Rule. I used it to post stuff for my "beta-testers" - so it has the "beta" tutorials. I was going to edit those down and wait to add new photos with the final version of the ruler - but since I don't know long it will take to actually GET them - I think I'll work on editing the tutorials down and just post them with the "prototype" photos. The changes that I made were only "cosmetic" - so the prototype is not that different from the final version. I'll try to get those done by the end of the week - so stay tuned - I'll let you know when they are ready - and when I change the blog to "public". (It is now "public".)

That way you can hop on over to the other blog and check out the design - and see how the ruler works. Then - if you're interested - I can make up an old-fashioned "waiting list". If you email me at "caseyq19 - at - gmail - dot - com" and put "Waiting List" in the subject line - I can add you to the list of "waiting" customers. I can't take "pre-orders" - because it's just me - and I don't have "PayPal" or the "postage" set up yet. This is all going to be very "low-tech" until it becomes very "high volume".

I'll be asking $24.95 plus shipping/handling and sales tax if applicable. I think it's a fair price - similar sized rulers on the market are priced at the same amount - and mine is special - different - LEFT-HANDED - and worth it - ;))

===

What I LIKE about this ruler -

It's LEFT-HANDED!! - ;))

The easy-to-read numbers down the right side -
The fact that the numbers read 1-2-3-4-5-6 from TOP to BOTTOM -
In the LEFT Column when you can read "This way for a DIAGONAL cut" -

And that they also read 1-2-3-4-5-6 from TOP to BOTTOM -
In the LEFT Column when you can read "This way for a STRAIGHT cut" -
(The prototype has the numbers in the second column reading 6-5-4-3-2-1 -
this is the second of 3 "cosmetic" changes that I made for the final version.)


And it has a "hang-hole" in the BOTTOM LEFT corner - ;))
The prototype has no "hang-hole" - this is the last of the 3 "cosmetic" changes that I made for the final version.)

===

What I DON’T like about this ruler -

There are no “grabber” thingys on the bottom side -
So it MAY slip on your fabric -
But that’s not really something that bothers me -
Because I don't usually have that problem -
And there are plenty of options available if you choose to add them - ;))

===

How to USE the ruler -

Start with some pre-cut strips -
Either from your scrap bag -
Or of the size stated in a pattern -

You can also determine the width of strip that you want/need -
By using the LEFT-EZE™ Rule SIZE CHART -
Available on the LEFT-EZE™ Rule blog - HERE - ;))

===

How I use it to Trim the Selvage end of the strips -

For Half-Square Triangles (HST) -
Start with two contrasting strips -
(I used pre-cut 2-1/2" strips for these demos)
And place them right sides together -

Line them up with a horizontal line on your cutting mat - to keep them straight -

TURN the ruler so that you can read - This way for a STRAIGHT cut -

Line it up with a vertical line on your mat -
With the strip between ANY two horizontal lines -
Using the other horizontal lines to keep the ruler straight -

Cut UP the LEFT side of the ruler -

===

How I use it to Cut a Half-Square Triangle -

TURN the ruler so that you can read - This way for a DIAGONAL cut -

Line up the RIGHT side of the ruler along the cut edge of your strips -
With the "black triangle tip" at the TOP RIGHT of the strip -
The bottom of the strips will line up with a line on the ruler depending on its width -
Using the other horizontal lines to keep the ruler straight -
Cut UP the LEFT side of the ruler -

TURN the ruler so that you can read - This way for a STRAIGHT cut -

Line up the RIGHT side of the ruler along the cut edge of your strips -
With the "black triangle tip" at the BOTTOM LEFT of the strip -
The top of the strips will line up with a line on the ruler depending on its width -
Using the other horizontal lines to keep the ruler straight -
Cut UP the LEFT side of the ruler -

Sew them along the LONG/DIAGONAL side - starting at the "flat" end -

Press them open -

Use the diagonal line going from the corner to the center of the long side to trim the dog-ears -
The numbers down the LEFT column will help line up the bottom of the HST -
(The prototype has the numbers in this column reading 6-5-4-3-2-1 -
this is the second of 3 "cosmetic" changes that I made for the final version.
In the final version - the numbers will read 1-2-3-4-5-6 from top to bottom.)

Does it "measure" 2-1/2" square? -

Yes, it does - ;))

===

How I use it to Cut Quarter-Square Triangle units -
To make an Hourglass Block -

Using two contrasting strips - right sides together -
TURN the ruler so that you can read - This way for a DIAGONAL cut -
And make the first cut exactly the same way you did for a HST -

TURN the strip -
So that the cut edge lines up with a horizontal line on your cutting mat -

Using the DIAGONAL lines -

Line up the RIGHT side of the ruler along the cut edge of your strips -
With the "itty bitty - black triangle tip" at the BOTTOM LEFT of the strip -
The TOP of the strips will line up with a line on the ruler depending on its width -
Using the vertical lines to keep the ruler straight -
Cut UP the LEFT side of the ruler -

TURN the ruler -
Line up the RIGHT side of the ruler along the cut edge of your strips -
With the "black triangle tip" at the TOP RIGHT of the strip -
The bottom of the strips will line up with a line on the ruler depending on its width -
Cut ACROSS the TOP side of the ruler - From LEFT to RIGHT -

One HST - and two QST -

Sew the QST along the SHORT side -
Keeping the same fabric on top -
And sewing from the "flat" side -

Press them open -

Match the two sides -

Stitch them together -

Trim the dog-ears -
Using the diagonal line going from the corner to the center of the long side -
The numbers down the LEFT column will help line up the bottom of the block -

Do they measure 4-1/2" square - Yup! - ;))

If you cut QST in sets of two - you can start and end with a HST - ;))

===

How I use it to Cut a Flying Geese Unit -
I took two of the QST from above to use as the "Geese" units -

And used two strips - folded over onto themselves -
Because you need two "mirror image" "Wing" sections -
You need both a LEFT and a RIGHT wing for each "Geese" section -

I layered the pink strip on top of the brown strip -
To cut four layers at the same time -

Cut the HST just like before -

Opened them up -

Matched them to the "Geese" units -
With the "flat" sides at the top of the unit -
And the "pointy" ends at the bottom -

Started with one of the RIGHT "Wings" -
And put it on top of the "Geese" -
Right sides together -

Stitched them together -

Pressed them open -

Added the LEFT "Wing" -

Pressed them open -

See the "extra" pink on the right side -
That's for your 1/4" seam allowance when you sew it to the next unit or block -
So you don't cut off the point -

Trim the dog-ears like you did the HST -

And it measures 2-1/2" x 4-1/2" - ;))

So -
From two pre-cut 2-1/2" strips - I made all of this -

Which can be arranged to make this -

Or this -

Or this -

The possibilities are endless - ;))

===

Bottom line -

No more "flipping" rulers - OVER - BACK - or SIDEWAYS -

The numbers go in the CORRECT direction -

And are EASY TO READ -

Because -

It's LEFT-HANDED!! - ;))

Would I recommend this ruler?

YES - ;))

===



Talk to you later - gotta go - gotta sew -