QJ - BIG & BOLD - TWILIGHT FROST

QUILT JOURNAL
BIG & BOLD – TWILIGHT FROST

Machine Pieced
Machine Quilted by M
51" x 68"
Started - January 12, 2010
Top Completed – January 31, 2010
To M for Quilting – February 2, 2010

Pattern – Connecting Thread Kit
Cozy Quilt Designs –
Design by Daniela Stout

Quilt Pattern – Winding Plumes

This was a very cool pattern that I wanted to try – fat quarters – big blocks – very quick and easy.  The pattern called for a border – to make it 58” x 75” – but I liked the look without the borders – so I eliminated them – that saved even more time!

Grandson #2 really liked the darker colors when I showed him the finished quilt.  I decided to use the pattern again – only next time I would make the twin size – and in Black – White – and Red.  I also decided that I would make FIVE of them – one for each kid.  There is something about the Black/White/Red combination that all teen-agers like.  That’s gonna be a fun project!

LHQ - Sewing Machine Question

LEFT-HANDED QUILTING - Sewing Machine Question


BY SPECIAL REQUEST – 

Recently I got an email and a REALLY good question from Cheri – regarding sewing machines -

Cherie wrote -

I’m lefthanded and enjoy reading your post.

I have a question about sewing machines that are “lefty friendly”.  Have you found any?

I have a 2040 Pfaff purchased in 2001.  I love it except for the position of the bobbin holder.  For me it’s a contorted effort to get the bobbin holder back into the machine.

Thanks!  Cheri

I gave her a short answer and asked if she minded if I quoted her and did a “post” to answer her question in more detail.  I was/am sure that she and I are not the only ones who have trouble with the bobbin holder in their machine(s).  

She then answered back -

I would love it if you would share my question.  Maybe someone else has a solution.

I have an clear extension table with the Pfaff and it is not easy to do it by feel.  I have tried to use my right hand but could not successfully get the bobbin holder to “click” into place properly.  I usually end up removing the table when I need to switch bobbins…

Thanks!  Cheri

=====

OK Cheri - here goes – 

The quick answer is - NO - I haven't found any sewing machines that are "lefty friendly".  I keep hoping – maybe someday…

I have three sewing machines - two have the bobbin "under" the bed of the machine - so I know what you are talking about.

It is referred to as a “vertical bobbin”.

My White Jeans Machine 1777 - with my new table and extension table - has the bobbin "under" - and is a ROYAL PAIN to have to change!

It doesn't help to remove the extension table because I can't get to it from the top of the table - the space between the machine and the table is too narrow to get my hand in the correct position - and I can't see what I'm doing anyway - the table is in the way.
(Thanks to my husband - by the way - for taking the pictures for me.  ;))

First I have to “open the hatch” to get the bobbin case OUT to replace the bobbin itself

Even then - I have to do it "by feel" and get my finger/fingernail under the little flap "just right" so I can pop it OUT of the slot -

To get it back IN -
I get the bobbin case in the general area –
hold the “flap” with my left index fingernail – like so
with the “prong” just to the right of the “notch” it’s supposed to be “in”

And then – “by feel” –
I use my right index finger to slip it around to the left – and “into” the slot/notch

I repeat – A ROYAL PAIN!!

BUT - my third sewing machine - my Husqvarna Lily 555 - has the bobbin holder on the "top".

It is referred to as a “drop-in bobbin”.

It is flat with the top of the bed of the machine and the little plastic cover just slides off and the bobbin just DROPS IN.  Really neat!!  I LOVE it!

You still have to remove the quilt or block or whatever, of course, to get to it - but it is SUPER SIMPLE to replace the bobbin.  It sure beats having to do contortions to get the bobbin in the holder thingy!!  And - it's probably about as "lefty-friendly" as we're going to get!!

=====

So – does anyone else have a solution for Cheri - other than buying a new machine with a "drop-in" bobbin feature???  Let us know what you think - leave us a comment - we would love to hear from you!


Talk to you later – gotta go – gotta sew –