Tuesday, October 24, 2017

Lavender Lovely - Done! -


After a couple of false starts - Lavender Lovely is finally DONE!! - ;))

Plan A was to make a standard Jelly Roll Race Quilt - baby quilt size - but when I messed up - I switched to Plan B -

Plan B was to use some Quilt-As-You-Go Batting by June Tailor - HERE - but I didn't have the yardage to cut the wider strips  and I wanted to use the Jelly Roll - so then I switched to Plan C -

Plan C was/is a variation of both - kind of like a giant version of stitch-and-flip - ;))

I started by flipping over the basted batting/backing from last time - to stitch around the outer edges to tack the batting down - so it didn't somehow get folded over or caught while I was sewing from the top side.  It was easier to feed through the machine with the fabric side down - and I could see where the edge of the batting was -


I had pinned from the top - and that didn't pose a problem - lucky for me - YAY!! -



Finished sewing and took the pins out -


Took it over to the kitchen island - flipped it again - backing side down - grabbed a couple of strips - and patted myself on the back because I could see some really cool "registration" lines on the batting - to use to line things up as I stitched from the top -


Then I realized that I should turn the whole thing sideways so I could press the whole length of the strip from one side of the quilt to the other -


I also noticed that the batting was seriously wonky on this side - so I chalked out a line to use as a placement guide -


Laid out the first two strips - right sides together -

Oh - I forgot to mention that I had taken the original super-long Jelly Roll Race Quilt strips and cut them all down to 33" - and sorted them to mix up the prints a little -

And I pinned them - even though I didn't really need to because I'm using a fusible batting - the bottom strip is pressed/fused to the batting - the top strip is pinned through all the layers to keep it from shifting -


Took it to the machine - used my walking foot - and moved the needle to the right so that I had a 1/4" seam - stitched it down -


Took it back to the kitchen island - flipped the top strip open and pressed it down -


Turned it over to check out the first seam line from the back - not too bad - looks pretty straight -


Added another strip -


Rinse and repeat - checking periodically to see if the "registration" lines were still in line with the strips being added -


And got the bottom half done - turned it around -


And started adding strips to the other end - working from the middle to the top of the quilt -


And - from the back - the lines are pretty straight on the plaid - considering the fact that I can't see where I'm sewing and have no idea if I'm hitting the lines or not -


Any slight wobbles get hidden in the seam allowance -


Top strips all sewn -


Flipped over one of the sides to check "straightness" - not too bad -


Then - I stitched down the end strips - to keep them from getting twisted or folded over -


Flipped it over to mark the binding placement lines - trying to keep the stitching lines parallel and the seam lines on the back straight when compared to the edge -


Trying to get a straight edge -


The stitching line is the edge of the batting - the yellow line will be the edge of the quilt -


Keeping it pretty straight -


Binding is sewn on - edge of the binding on the placement line (ignore the second yellow line to the right - it's not the placement line) -


Can you see where I joined the binding? -


It's easier to see from the front -


The colors are "truer" in this photo - all ready to trim -


All trimmed - ready to press and fold over -


The back - with binding on -


The front - "Glamour" shot -


I stitched on a label for the baby - and ran it through the washer and dryer to soften it up - and THIS happened - Oops!! -


So I fixed it - with - what else? - with a heart - ;))


I wasn't about to put a nice, clean baby quilt back on the floor - so I took another "Glamour" shot of it on the quilting table.  The little heart is a little something "extra" that you might not notice at first glance - and no one will ever know that it's covering a frayed seam - unless they read my blog and see this post - ;))


I don't know what I'm going to be working on next -

But I still have to make the Scrap Card and Heart for my Scrapbook -

And I promised a table runner to a friend -

And some potholders to another friend -

So it's not like I don't have choices - ;))



Talk to you later - gotta go - gotta sew -




3 comments:

Karen M said...

What an ordeal! But the results are worth it.

Gene Black said...

I have to confess that I like the back better than the top. But that is a "problem" I have with my pieced backings also.
The heart is a great way to cover a seam that pops. I have fixed those on my quilts in various ways. I like the heart idea - so I am "borrowing" it.

Julie Fukuda said...

What an adventure reading the process. could never ever do something like that without making dozens of goofs.

LinkWithin

Related Posts Plugin for WordPress, Blogger...